Product ID:THERMOFIT S-1006 ADHESIVE PART A
MSDS Date:09/01/1988
FSC:8040
NIIN:01-127-9256
MSDS Number: BNPWK

RAYCHEM CORPORATION

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-3333

Info Phone: 415-361-3333

Cage: 06099

RAYCHEM CORPORATION

MENLO PARK, CA 94025 US

Telephone: (415)361-3333

Cage: 06099

EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN

CAS: 25068-38-6

OSHA PEL N/K

ACGIH TLV: N/K

AMORPHOUS SILICA.ACGIH TLV FROM INTENDED CHANGE LIST

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 0.2 MG/M3 RESP DUST

LD50 LC50 Mixture:LD50 RAT ORAL 11.4 G/KG (EPOXY RESIN)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPEATED OR PROLONGED CONTACT MAY
PRODUCE SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSE IN
SUSCEPTIBLE INDIVIDUALS.THIS PRODUCT CONTAINS TRACE AMOUNTS OF
RESIDUAL EPICHLOROHYDRIN.
Explanation of Carcinogenicity:EPICHLOROHYDRIN:KNOWN TO CAUSE CANCER
(CAL PROP 65,1987).
Effects of
Overexposure:EYES:IRRITATING.SKIN:IRRITATING.PROLONGED/REPEATED
CONTACT MAY CAUSE SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSE IN
SUSCEPTIBLE INDIVIDUALS.INGESTION:MAY BE IRRITATING BUT IS NOT
KNOWN TO HAVE OTHER EFFECTS.INHALATION:IRRITATING TO NOSE AND
THROAT.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15
MINUTES,WHILE HOLDING EYELIDS OPEN.SKIN:WASH IMMEDIATELY WITH MILD
SOAP AND WATER.CONSULT PHYSICIAN IF ALLERGIC SYMPTOMS
DEVELOP.INGESTION:DO NOT INDU CE VOMITING.DILUTE WITH WATER OR
MILK.SEEK MEDICAL ATTENTION.INHALATION:REMOVE TO FRESH AIR.SEEK
MEDICAL ADVICE AS APPROPRIATE.

Flash Point:480F,249C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,WATER,DRY CHEMICAL.
Fire Fighting Procedures:TOXIC FUMES MAY BE INVOLVED IN A FIRE.FIREMEN
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:MAY
INCLUDE CARBON MONOXIDE,CARBON DIOXIDE,ACIDS,ALDEHYDES AND NITROGEN
COMPOUNDS.IN COMMON WITH ALL POLYMERIC (SEE SUPP DATA)

Spill Release Procedures:ISOLATE SPILL.REMOVE WITH INERT ABSORBENT
MATERIAL,USING APPROPRIATE PRECAUTIONS TO PREVENT CONTACT OR OTHER
EXPOSURE.CLEAN UP RESIDUE WITH SOAP AND WATER.
Neutralizing Agent:N/K

Handling and Storage Precautions:CURING OF ADHESIVE (PARTS A AND B)
SHOULD BE DONE IN A WELL-VENTILATED AREA.THE CURING PROCESS IS
EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN AND EYES.WASH HANDS
THOROUGHLY AFTER USE.USE ONLY WITH ADEQUATE VENTILATION.

Respiratory Protection:N/K
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE,ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:SHOULD BE BASED ON THE OPERATION PERFORMED
AND PROVIDED AS NECESSARY TO PREVENT CONTACT.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
VOLATILITY AT 23C,73.4F (%WT/WT):NEGLIGIBLE.EXPLO
HAZ:MATERIALS,DECOMPOSITION PRODUCTS ARE LIKELY TO BE TOXIC AND
SHOULD NOT BE INHALED.ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .

Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:>1 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS,PURPLE LIQUID WITH A SLIGHT ODOR.

NOT ESTABLISHED.MAY INCLUDE:CARBON MONOXIDE,CARBON
DIOXIDE,ACIDS,ALDEHYDES AND NITROGEN COMPOUNDS.LIKELY TO BE TOXIC.
Stability Condition to Avoid:MAY REACT EXOTHERMICALLY (RELEASE HEAT)
WITH ACIDS,BASES OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:NOT ESTABLISHED.MAY INCLUDE:CARBON
MONOXIDE,CARBON DIOXIDE,ACIDS,ALDEHYDES AND NITROGEN
COMPOUNDS.LIKELY TO BE TOXIC.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS.COORDINATION WITH SUPPORTING
INSTALLATION AND/OR MACOM ENVIRONMENTAL COORDINATION PRIOR TO
DISPOSAL IS RECOMMENDED TO DETERMINE APPROPRIATE DISPOSAL METHODS
.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.